Specifications

CLI Management Guide
TigerAccess™ EE
256 SMC7824M/VSW
8.2.2.7 Port Priority
To configure priority of an LACP member port, use the following command.
Command Mode Description
lacp port priority PORTS <1-
65535>
Bridge
Sets the LACP priority of a member port, select the
port number. (default: 32768)
To delete the configured port priority of the member port, use the following command.
Command Mode Description
no lacp port priority PORTS Bridge
Deletes the configured port priority of a selected mem-
ber port, select the member port number.
8.2.2.8 Displaying LACP Configuration
To display a configured LACP, use the following command.
Command Mode Description
show lacp aggregator Shows the information of aggregated port.
show lacp aggregator AGGRE-
GATIONS
Shows the information of selected aggregated port.
show lacp port Shows the information of member port.
show lacp port PORTS Shows the information of appropriated member port.
show lacp statistics
Enable
Global
Bridge
Shows aggregator statistics.
To reset LACP statistics information, use the following command.
Command Mode Description
clear lacp statistic
Enable
Global
Bridge
Resets the information of statistics.