Specifications

CLI Management Guide
TigerAccess™ EE
240 SMC7824M/VSW
To display a specified VLAN description, use the following command.
Command Mode Description
show vlan description
Enable
Global
Bridge
Shows a specified VLAN description.
8.1.7 VLAN Precedence
To make precedence between MAC address and Subnet based VLAN, you can choose
one of both with below command.
Command Mode Description
vlan precedence {mac | subnet} Bridge
Configure precedence between MAC based VLAN and
Subnet based VLAN.
8.1.8 Displaying VLAN Information
User can display the VLAN information about Port based VLAN, Protocol based VLAN,
MAC based VLAN, Subnet based VLAN and QinQ.
Command Mode Description
show vlan Shows all VLAN configurations.
show vlan VLANS Shows a configuration for specific VLAN.
show vlan description Shows a description for specific VLAN.
show vlan dot1q-tunnel Shows QinQ configuration.
show vlan protocol Shows VLAN based on protocol.
show vlan macbase Shows VLAN based on MAC address.
show vlan subnet
Enable
Global
Bridge
Shows VLAN based on subnet.