Specifications

CLI Management Guide
TigerAccess™ EE
236 SMC7824M/VSW
8.1.1.1 Creating VLAN
To configure VLAN on user’s network, use the following command.
Command Mode Description
vlan create VLANS Bridge
Creates new VLAN by assigning VLAN ID:
VLANS: VLAN ID (1-4094, multiple entries possible)
The variable VLANS is a particular set of bridged interfaces. The frames are bridged only
among interfaces in the same VLAN.
8.1.1.2 Specifying PVID
By default, PVID 1 is specified to all ports. You can also configure a PVID. To configure a
PVID in a port, use the following command.
Command Mode Description
vlan pvid PORTS PVIDS Bridge
Configures a PVID:
PORTS: port numbers
PVIDS: PVID (1-4094, multiple entries possible)
8.1.1.3 Assigning Port to VLAN
To assign a port to VLAN, use the following command.
Command Mode Description
vlan add VLANS PORTS {tagged
| untagged}
Assigns a port to VLAN:
VLANS: VLAN ID (1-4094)
PORTS: port number
vlan del VLANS PORTS
Bridge
Deletes associated ports from specified VLAN:
VLANS: VLAN ID (1-4094)
PORTS: port number to be deleted
When you assign several ports to VLAN, you have to enter each port separated by a
comma without space or use dash mark “-“ to arrange port range.
8.1.1.4 Deleting VLAN
To delete VLAN, use the following command.
Command Mode Description
no vlan VLANS Bridge Deletes VLAN, enter the VLAN ID to be deleted.
When you delete a VLAN, all ports must be removed from the VLAN; the VLAN must be
empty.
i
i
i