Specifications

Management Guide CLI
TigerAccess™ EE
SMC7824M/VSW 231
To specify IP address of sFlow agent, use the following command.
Command Mode Description
sflow agent-ip A.B.C.D
Specifies IP address of sFlow agent
A.B.C.D: agent IP address (default: 127.0.0.1)
no sflow agent-ip
Global
Deletes specified IP address of sFlow agent.
7.16.3 Enabling sFlow on Port
To enable or disable sFlow function on a port, use the following command.
Command Mode Description
sflow port PORT enable Enables sFlow function on specified port.
sflow port PORT disable
Global
Disables sFlow function on specified port.
7.16.4 Maximum IP Header Size
To set the maximum IP header size of sampling packets on a port, use the following
command.
Command Mode Description
sflow port PORTS max-header-
size <16-256>
Configures the maximum header size of incoming
sample packets to specific port.
16-256: maximum IP header size value (default:128)
no sflow port PORTS max-
header-size
Global
Deletes configured maximum header size of sample
packets.
7.16.5 Counter Interval
To set the interval to send interface counter information to sFlow poller, use the following
command.
Command Mode Description
sflow port PORTS counter-
interval <1-1000>
Sets the interval of interface counter for port
no sflow port PORTS counter-
interval
Global
Deletes configured interval of interface counter for port
7.16.6 Sample Rate
To set sampling interval of port, use the following command.
Command Mode Description
sflow port PORTS sample-rate
<1-2000>
Specifies sampling interval of port for incoming pack-
ets.
no sflow port PORTS sample-
rate
Global
Deletes configured sampling interval of port.