Specifications

Management Guide CLI
TigerAccess™ EE
SMC7824M/VSW 225
Tab. 7.2 shows the result of mask calculation of default value.
Type Status
ICMP_ECHOREPLY (0) OFF
ICMP_DEST_UNREACH (3) ON
ICMP_SOURCE_QUENCH (4) ON
ICMP_REDIRECT (5) OFF
ICMP_ECHO (8) OFF
ICMP_TIME_EXCEEDED (11) ON
ICMP_PARAMETERPROB (12) ON
ICMP_TIMESTAMP (13) OFF
ICMP_TIMESTAMPREPLY (14) OFF
ICMP_INFO_REQUEST (15) OFF
ICMP_INFO_REPLY (16) OFF
ICMP_ADDRESS (17) OFF
ICMP_ADDRESSREPLY (18) OFF
Tab. 7.2 Mask Calculation of Default Value
To configure the limited ICMP transmission time, use the following command.
Command Mode Description
ip icmp interval rate-limit IN-
TERVAL
Global
Configures a limited ICMP transmission time.
INTERVAL: 0-2000000000 (unit: 10 ms)
The default ICMP interval is 1 second (100 ms).
To return to default ICMP configuration, use the following command.
Command Mode Description
ip icmp interval default Global Returns to default configuration.
To display ICMP interval configuration, use the following command.
Command Mode Description
show ip icmp interval
Enable
Global
Bridge
Shows ICMP interval configuration.
i