Specifications

Management Guide CLI
TigerAccess™ EE
SMC7824M/VSW 209
7.9.3 Displaying Port Security
To display the information of the port security, use the following command.
Command Mode Description
show port security [PORTS]
Enable
Global
Bridge
Shows the information of the port security.
7.10 MAC Table
A dynamic MAC address is automatically registered in the MAC table, and it is removed if
there is no access to/from the network element corresponding to the MAC address during
the specified MAC aging time. On the other hand, a static MAC address is manually reg-
istered by user. This will not be removed regardless of the MAC aging time before remov-
ing it manually.
To manage a MAC table in the system, use the following command.
Command Mode Description
mac NAME PORT MAC-ADDR
Specifies a static MAC address in the MAC table.
NAME: bridge name
PORT: port number
MAC-ADDR: MAC address
mac aging-time <10-21474830>
Bridge
Specifies MAC aging time:
10-21474830: aging time (default: 300)
To remove the registered dynamic MAC addresses from the MAC table, use the following
command.
Command Mode Description
clear mac [NAME]
Clears dynamic MAC addresses.
NAME: bridge name
clear mac NAME PORT
Clears dynamic MAC addresses.
PORT: port number
clear mac NAME PORT MAC-ADDR
Enable
Global
Bridge
Clears dynamic MAC addresses.
MAC-ADDR: MAC address