Specifications

CLI Management Guide
TigerAccess™ EE
208 SMC7824M/VSW
Step 4
Enter a secure MAC address for the port.
Command Mode Description
port security PORTS mac-
address MAC-ADDR vlan NAME
Bridge Sets a secure MAC address for the port.
To disable the configuration of port secure, use the following command.
Command Mode Description
no port security PORTS Disables port security on the port.
no port security PORTS mac-
address [MAC-ADDR] [vlan
NAME]
Deletes a secure MAC address for the port.
no port security PORTS maxi-
mum
Returns to the default number of secure MAC ad-
dresses. (default: 1)
no port security PORTS viola-
tion
Bridge
Returns to the violation mode to the default.
(default: shutdown)
7.9.2 Port Security Aging
Port security aging is to set the aging time for all secure addresses on a port. Use this
feature to remove and add PCs on a secure port without manually deleting the existing
secure MAC addresses while still limiting the number of secure addresses on a port.
Command Mode Description
port security PORTS aging
static
Enables aging for configured secure addresses.
port security PORTS aging time
<1-1440>
Configures aging time in minutes for the port. All the
secure addresses age out exactly after the time.
port security PORTS aging type
{absolute | inactivity}
Bridge
Configures aging type.
• absolute all the secure addresses on this port age out exactly after the time (min-
utes) specified lapses and are removed from the secure address list.
• inactivity the secure addresses on this port age out only if there is no data traffic
from the secure source addresses for the specified time period.
To disable the configuration of port secure aging, use the following command.
Command Mode Description
no port security PORTS aging
static
Disables aging for only statistically configured secure
addresses.
no port security PORTS aging
time
Disables port secure aging for all secure addresses on
a port.
no port security PORTS aging
type
Bridge
Returns to the default condition. (absolute)