Specifications

CLI Management Guide
TigerAccess™ EE
206 SMC7824M/VSW
The following is an example of configuring NetBIOS filtering in port 1-2 and showing it.
SWITCH(bridge)# netbios-filter 1-2
SWITCH(bridge)# show netbios-filter
o:enable .:disable
----------------------------
1 2
1234567890123456789012345678
----------------------------
oo..........................
----------------------------
SWITCH(bridge)#
7.8 Max New Hosts
For the switch, you have to lock the port like MAC filtering before configuring max hosts.
In case of ISPs, it is possible to arrange a billing plan for each user by using this configu-
ration.
Max-new-host is to limit the number of users by configuring the number of MAC ad-
dresses that can be learned on the system and on the port for a second. The number of
MAC addresses that can be learned on the system has the priority.
To configure max new hosts, use the following command.
Command Mode Description
max-new-hosts PORTS VALUE
The number of MAC addresses that can be learned on
the port for a second.
VALUE: maximum MAC number <1-2147483646>
max-new-hosts system VALUE
Bridge
The number of MAC addresses that can be learned on
the system for a second.
VALUE: maximum MAC number <1-2147483646>
To delete configured max new hosts, use the following command.
Command Mode Description
no max-new-hosts [PORTS]
Deletes the number of MAC addresses that can be
learned on the port.
no max-new-hosts system
Bridge
Deletes the number of MAC addresses that can be
learned on the system.
To display configured max new hosts, use the following command.
Command Mode Description
show max-new-hosts
Enable
Global
Bridge
Shows the configured Max-new-hosts.