Specifications

Management Guide CLI
TigerAccess™ EE
SMC7824M/VSW 197
7.6.7.4 Applying and Modifying Admin Policy
After configuring an admin policy using the above commands, apply it to the system with
the following command. If you do not apply this policy to the system, all specified configu-
rations from Admin-Policy Configuration mode will be lost.
To save and apply an admin policy, use the following command.
Command Mode Description
apply
Admin-
Policy
Applies an admin policy to the system.
To modify an admin policy, use the following command.
Command Mode Description
policy admin NAME modify Global
Modifies an admin policy.
NAME: admin-policy name.
7.6.8 Displaying Admin Rule
To show an admin rule profile configured by user, use the follwing command.
Command Mode Description
show flow-profile admin Admin-Flow Shows a profile of admin flow.
show policy-profile admin
Admin-
Policy
Shows a profile of admin policy.
The following command can be used to show a certain rule by its name, all rules of a cer-
tain type, or all rules at once sorted by a rule type.
Command Mode Description
show { flow | class | policy }
admin [NAME]
show { flow | class | policy }
admin detail [NAME]
Enable
Global
Bridge
Shows the information relating to each rule, enter an
admin rule name.
show running-config { admin-
flow | admin-policy }
All Shows all configurations of admin rules.