Specifications

Management Guide CLI
TigerAccess™ EE
SMC7824M/VSW 195
7.6.7 Admin Rule Action
7.6.7.1 Admin Policy Creation
For the switch, you need to open Admin-Policy Configuration mode first. To open Policy
Configuration mode, use the following command.
Command Mode Description
policy admin NAME create Global
Creates an admin policy and opens Admin-Policy Con-
figuration mode.
NAME: admin-policy name.
After opening Admin Policy Configuration mode, the prompt changes from
SWITCH(config)# to SWITCH(config-admin-policy[NAME])#.
To delete configured admin policy or all admin policies, use the following command.
Command Mode Description
no policy admin NAME Deletes specified admin policy.
no policy admin all
Global
Deletes all admin policies.
After opening Admin-Policy Configuration mode, an admin policy can be configured by
user. You can specify the rule action for the classified packets in each admin-policy.
• The admin-policy name must be unique. Its size is limited to 32 significant characters.
• The admin- policy name cannot start with the alphabet “a” or “A”.
• The order in which the following configuration commands are entered is arbitrary.
• The configuration of an admin policy being configured can be changed as often as
wanted until the apply command is entered.
• Use the show policy-profile admin command to display the configuration entered
up to now.
If you create the admin policy already, you need to include specified flow or class to spec-
ify the rule action for the packets matching configured classifying patterns on flow or class.
To include specific flow or class in an admin policy, use the following command.
Command Mode Description
include-flow NAME
Includes an admin flow in a specified policy.
NAME:admin-flow name
include-class NAME
Admin-
Policy
Includes an admin class in a specified policy.
NAME:admin-class name
One admin policy cannot include both flow and class at the same time. Either admin flow
or admin class can belong to one policy.
!
i