Specifications

CLI Management Guide
TigerAccess™ EE
194 SMC7824M/VSW
To delete a specified packet-classifying pattern, use the following command.
Command Mode Description
no ip
no ip header-length
Admin-Flow
Deletes a specified packet-classifying pattern for each
option.
7.6.6.3 Applying and modifying Admin Flow
After configuring an admin flow using the above commands, apply it to the system with
the following command. If you do not apply it to the system, all specified configurations
from Admin-Flow Configuration mode will be lost.
To save and apply an admin flow, use the following command.
Command Mode Description
apply Admin-Flow Applies an admin flow to the system.
To modify an admin flow, use the following command.
Command Mode Description
flow admin NAME modify Global Modifies a flow, enter an admin flow name.
You should save and apply the admin flow to system using apply command whenever
you modify any configuration of the admin flow.
7.6.6.4 Class Creation
One class can include several flows. You can simply handle and configure the packets on
several flows at once.
To create a class including more than 2 flows, use the following command.
Command Mode Description
class admin NAME flow FLOW1
[FLOW2] [FLOW3]
Global
Creates an admin class including at least 2 admin
flows.
NAME: admin class name
FLOW: admin flow name
To delete configured admin class or all admin classes, use the following command.
Command Mode Description
no class admin all Deletes all admin classes.
no class admin NAME
Deletes specified admin class.
NAME: admin class name
no class admin NAME flow
FLOW1 [FLOW2] [FLOW3]
Global
Removes specified admin flows from class.
NAME: admin class name
FLOW: admin flow name
i