Specifications

CLI Management Guide

TigerAccess™ EE

192 SMC7824M/VSW

7.6.6 Admin Rule

For the switch, it is possible to block a specific service connection like telnet, FTP, ICMP,

etc with an admin rule function.

7.6.6.1 Creating Admin Flow for packet classification

To classify packets by a specific admin flow for the switch, you need to open Admin-Flow

Configuration mode first. To open Admin-Flow Configuration mode, use the following

command.

Command Mode Description

flow admin NAME create Global

Creates an admin flow and opens Admin-Flow Configu-

ration mode.

NAME: admin-flow name.

After opening Admin-Flow Configuration mode, the prompt changes from

SWITCH(config)# to SWITCH(config-admin-flow[NAME])#.

To delete configured admin flow or all admin flows, use the following command.

Command Mode Description

no flow admin NAME Deletes specified admin flow.

no flow admin all

Global

Deletes all admin flows.

After opening Admin-Flow Configuration mode, a flow can be configured by user. The

packet classification can be configured for each admin-flow.

• The admin-flow name must be unique. Its size is limited to 32 significant characters.

• The admin-flow name cannot start with the alphabet “a” or “A”.

• The order in which the following configuration commands are entered is arbitrary.

• The configuration of a flow being configured can be changed as often as wanted

until the apply command is entered.

• Use the show flow-profile admin command to display the configuration entered up

to now.