Specifications

Management Guide CLI
TigerAccess™ EE
SMC7824M/VSW 187
Port-based user priority marking can be configured and applied to untagged packets only.
To delete Bridge-based CoS Marking, use the following command.
Command Mode Description
no qos mark inbound port-cos
port PORTS
Deletes CoS marking configuration of port.
no qos mark inbound port-dscp
port PORTS
Deletes DSCP marking configuration of port.
no qos mark inbound port-
queue port PORTS
Bridge
Deletes Queue marking configuration of port.
To display Bridge-based CoS Marking, use the following command.
Command Mode Description
show qos mark inbound port-
cos
show qos mark inbound port-
dscp
show qos mark inbound port-
queue
Enable
Global
Bridge
Shows the bridge-based CoS marking configuration of
specified parameter. .
• Policy-based CoS Marking
To configure Policy-based CoS Marking with specified values, use the following command.
Command Mode Description
action match queue <0-7> Policy
Marks the packets with queue number.
0-7: queue number
Command Mode Description
action match cos <0-7>
Marks the packets with 802.1p class of service.
0-7: CoS value
action match dp <0-2>
Marks the packets with drop precedence.
0-2: Drop precedence value
action match dscp <0-63>
Policy
Marks the packets with DSCP field.
0-63: DSCP value
To delete the policy-based CoS marking, use the following command.
Command Mode Description
no action match queue
no action match cos
no action match dp
no action match dscp
Policy
Deletes the policy-based marking configuration on
specified values.
i