Specifications

Management Guide CLI
TigerAccess™ EE
SMC7824M/VSW 185
7.6.4.3 Policy Priority
If rules that are more than two match the same packet then the rule having a higher prior-
ity will be processed first. To set a priority for a policy, use the following command.
Command Mode Description
priority {low | medium | high |
highest}
Policy Sets a priority for a policy. (default: medium)
7.6.4.4 Policy Action
To specify the rule action for the packets matching configured classifying patterns, use the
following command.
Command Mode Description
action match deny Denies the classified packets.
action match permit Permits the classified packets.
action match redirect vlan
VLANS port PORTS
Redirects the classified packets to specified port.
VLANS: VLAN ID (1-4094)
PORTS: port number
action match mirror
Sends a copy of classified packets to mirror monitoring
port.
action match vlan VLANS
Specifies a VLAN ID of classified packets.
VLANS: VLAN ID (1-4094)
action match copy-to-cpu Sends classified packets to CPU.
action match route next-hop
A.B.C.D
Policy
Specifies next-hop address of classified packets.
A.B.C.D:
In this switch, redirect command cannot be configured when MAC filtering function is
running in the system.
To delete a specified rule action, use the following command.
Command Mode Description
no action match deny
no action match permit
no action match redirect
no action match mirror
no action match vlan
no action match copy-to-cpu
no action match route next-hop
Policy Deletes a specified rule action.
7.6.4.5 Marking and Remarking
This switch can use CoS values of packet marking or remarking to support QoS feature.
Packet marking allows you to partition your network into multiple priority levels or classes
!