Specifications

CLI Management Guide
TigerAccess™ EE
162 SMC7824M/VSW
7.4.3.3 Subject of RMON Event
You need to configure event and identify subject using various data from event. To identify
subject of RMON event, use the following command.
Command Mode Description
owner NAME RMON
Identifies subject of event. You can use maximum 126
characters and this subject should be same with the
subject of RMON event.
7.4.3.4 Event Type
When RMON event is happened, you need to configure event type to arrange where to
send event.
To configure event type, use the following command.
Command Mode Description
type log
Configures event type as log type. Event of log type is
sent to the place where the log file is made.
type trap
Configures event type as trap type. Event of trap type
is sent to SNMP administrator and PC.
type log-and-trap Configures event type as both log type and trap type.
type none
RMON
Configures none event type.
7.4.3.5 Activating RMON Event
After finishing all configurations, you should activate RMON event. To activate RMON
event, use the following command.
Command Mode Description
active RMON Activates RMON event.
7.4.3.6 Deleting Configuration of RMON Event
Before changing the configuration of RMON event, you should delete RMON event of the
number and configure it again.
To delete RMON event, use the following command.
Command Mode Description
no rmon-event <1-65535> Global Delete RMON event of specified number.