Specifications

Management Guide CLI
TigerAccess™ EE
SMC7824M/VSW 161
7.4.2.9 Deleting Configuration of RMON Alarm
When you need to change a configuration of RMON alarm, you should delete an existing
RMON alarm.
To delete RMON alarm, use the following command.
Command Mode Description
no rmon-alarm <1-65535> Global
Deletes RMON history of specified number, enter the
value for deleting.
7.4.3 RMON Event
RMON event identifies all operations such as RMON alarm in the switch. You can config-
ure event or trap message to be sent to SNMP management server when sending RMON
alarm.
You need to open RMON Event Configuration mode to configure RMON event.
Command Mode Description
rmon-event <1-65535> Global
Opens RMON Event Configuration mode.
1-65535: index number
7.4.3.1 Event Community
When RMON event is happened, you need to input community to transmit SNMP trap
message to host. Community means a password to give message transmission right.
To configure community for trap message transmission, use the following command.
Command Mode Description
community NAME RMON
Configures password for trap message transmission
right.
NAME: community name
7.4.3.2 Event Description
It is possible to describe event briefly when event is happened. However, the description
will not be automatically made. Thus administrator should make the description.
To specify a description about the current RMON event, use the following command.
Command Mode Description
description DESCRIPTION RMON Specifies the description of the current RMON event.