Specifications

CLI Management Guide
TigerAccess™ EE
150 SMC7824M/VSW
7.2.2 Local OAM Mode
To configure Local OAM, use the following command.
Command Mode Description
oam local mode {active |
passive} PORTS
Bridge Configures the mode of local OAM.
Both request and loopback are possible for local OAM active. However, request or loop-
back is impossible for local OAM passive.
7.2.3 OAM Unidirection
When RX is impossible in local OAM, it is possible to send the information by using TX.
To enable/disable the function, use the following command.
Command Mode Description
oam local unidirection enable
PORTS
Sends the information by using TX.
oam local unidirection disable
PORTS
Bridge
Disables to transmit the information by using TX.
7.2.4 Remote OAM
To configure remote OAM, use the following command.
Command Mode Description
oam remote oam admin <1-2>
{enable | disable} PORTS
Enables/disable remote OAM.
oam remote oam mode <1-2>
{active | passive} PORTS
Bridge
Selects remote OAM mode.
To display the information of peer host using OAM function, use the following command.
Command Mode Description
oam remote alarm optical <1-3>
<0-65535> PORTS
oam remote alarm temperature
<0-255> PORTS
oam remote alarm voltage {min |
max} <0-65535> PORTS
oam remote electrical mode {full
| half} PORTS
oam remote general autoneg <1-
4> {enable | disable} PORTS
Bridge
Shows the information of peer host using OAM func-
tion.
i