Specifications

Management Guide CLI
TigerAccess™ EE
SMC7824M/VSW 145
Command Mode Description
snmp alarm-severity rmon-alarm-falling {criti-
cal | major | minor | warning | intermediate}
Sets severity of an alarm for RMON
alarm falling.
snmp alarm-severity system-restart {critical |
major | minor | warning | intermediate}
Sets severity of an alarm for system
restart.
snmp alarm-severity module-remove {critical |
major | minor | warning | intermediate}
Sets severity of an alarm for module
removed.
snmp alarm-severity temperature-high {critical
| major | minor | warning | intermediate}
Global
Sets severity of an alarm for system
temperature high.
To delete configured alarm severity, use the following command.
Command Mode Description
no snmp alarm-severity fan-fail
no snmp alarm-severity cold-start
no snmp alarm-severity broadcast-over
no snmp alarm-severity cpu-load-over
no snmp alarm-severity dhcp-lease
no snmp alarm-severity dhcp-illegal
no snmp alarm-severity fan-remove
no snmp alarm-severity ipconflict
no snmp alarm-severity memory-over
no snmp alarm-severity mfgd-block
no snmp alarm-severity port-link-down
no snmp alarm-severity port-remove
no snmp alarm-severity port-thread-over
no snmp alarm-severity power-fail
no snmp alarm-severity power-remove
no snmp alarm-severity rmon-alarm-rising
no snmp alarm-severity rmon-alarm-falling
no snmp alarm-severity system-restart
no snmp alarm-severity module-remove
no snmp alarm-severity temperature-high
Global Deletes configured alarm severity.