Specifications

Management Guide CLI
TigerAccess™ EE
SMC7824M/VSW 133
admin 103 2.6 2.0 20552 5100 ? S 20:12 0:53 /usr/sbin/swchd
(Omitted)
SWITCH#
6.3.10 Displaying System Image
To display a current system image version, use the following command.
Command Mode Description
show version Enable/Global/Bridge Shows a version of system image.
To display a size of the current system image, use the following command.
Command Mode Description
show os-size Enable/Global/Bridge Shows size of system image.
6.3.11 Displaying Installed OS
To display the current usage of the system flash memory, use the followng command.
Command Mode Description
show flash Enable/Global/Bridge
Shows the current usage of the system
flash memory.
6.3.12 Default OS
The switch supports the dual OS feature. You can verify the running OS in the flash
memory with the show flash command. When two system OSs are installed, you can set
one of those as the default OS. To set the default OS of the system, use the following
command.
Command Mode Description
default-os {os1 | os2} Enable Sets the default OS of the system. (default: os1)
6.3.13 Switch Status
To display the temperature of switch, power status, fan and external alarm status, use the
following command.
Command Mode Description
show status fan Shows fan status of switch.
show status power Shows power status.
show status temp Shows temperature of switch.
show status connector Shows the type of connector of switch.
show external-alarm
Enable
Global
Bridge
Shows the current status of external alarms (#1 to #5)