Specifications

Management Guide CLI
TigerAccess™ EE
SMC7824M/VSW 131
6.3.5 MAC Table
To display MAC table recorded in specific port, use the following command.
Command Mode Description
show mac BRIDGE [PORTS]
show mac count [PORTS]
Enable
Global
Bridge
Shows MAC table.
BRIDGE: bridge name
PORTS: port number
The following is an example of displaying a current MAC table.
SWITCH(config)# show mac 1-3
==================================================================
port mac addr permission status in use
==================================================================
1 00:d0:cb:22:00:49 OK dynamic 0.02
2 00:0b:5d:99:58:4c OK dynamic 4.95
3 00:0b:5d:51:3a:a8 OK dynamic 6.05
SWITCH(config)#
6.3.6 Running Time of System
To display running time of the system, use the following command.
Command Mode Description
show uptime
Enable
Global
Bridge
Shows running time of the system.
The following is an example of displaying running time of the system.
SWITCH# show uptime
10:41am up 15 days, 10:55, 0 users, load average: 0.05, 0.07, 0.01
SWITCH#
6.3.7 System Information
To display the system information, use the following command.
Command Mode Description
show system
Enable
Global
Bridge
Shows the system information.
The following is an example of displaying the system information of the switch.
SWITCH# show system