Specifications

CLI Management Guide

TigerAccess™ EE

128 SMC7824M/VSW

The following is to verify network status between 172.16.157.100 and 172.16.1.254 when

IP address of the switch is configured as 172.16.157.100.

SWITCH# ping

Protocol [ip]:

Target IP address: 172.16.1.254

Repeat count [5]: 5

Datagram size [100]: 100

Timeout in seconds [2]: 2

Extended commands [n]: y

Source address or interface: 172.16.157.100

Type of service [0]: 0

Set DF bit in IP header? [no]: no

Data pattern [0xABCD]:

PATTERN: 0xabcd

PING 172.16.1.254 (172.16.1.254) from 172.16.157.100 : 100(128) bytes of data.

108 bytes from 172.16.1.254: icmp_seq=1 ttl=255 time=30.4 ms

108 bytes from 172.16.1.254: icmp_seq=2 ttl=255 time=11.9 ms

108 bytes from 172.16.1.254: icmp_seq=3 ttl=255 time=21.9 ms

108 bytes from 172.16.1.254: icmp_seq=4 ttl=255 time=11.9 ms

108 bytes from 172.16.1.254: icmp_seq=5 ttl=255 time=30.1 ms

--- 172.16.1.254 ping statistics ---

5 packets transmitted, 5 received, 0% packet loss, time 8050ms

rtt min/avg/max/mdev = 11.972/21.301/30.411/8.200 ms

SWITCH#

6.3.2 IP ICMP Source Routing

If you implement PING test to verify the status of network connection, ICMP request ar-

rives at the final destination as the closest route according to the routing theory.

A Switch

PING test to C

Request

The route for general PING test

Fig. 6.1 Ping Test for Network Status