Specifications

CLI Management Guide
TigerAccess™ EE
122 SMC7824M/VSW
This module DMI command is enabled by default. Thus, if you don’t want to get DMI in-
formation, configure this setting as disable.
If disabled, the switch does not show DMI information of the SFP ports when using the
show port module-info command.
To display the configuration of DMI module, use the following command.
Command Mode Description
show module dmi
Enable
Global
Bridge
Displays the configuration result of DMI module.
This is an example of disabling the DMI module and displaying the setting result.
SWITCH(config)# module dmi disable
SWITCH(config)# show module dmi
----------------------------------------
Module Diagnostics Monitoring
----------------------------------------
module diagnotics monitor(dmi) : disable
SWITCH(config)#
i
!