Specifications

Management Guide CLI
TigerAccess™ EE
SMC7824M/VSW 113
6.1.3 Time Zone
The switch provides three kinds of time zone, GMT, UCT and UTC. The time zone of the
switch is predefined as GMT (Greenwich Mean Time). Also you can set the time zone
where the network element belongs.
To set the time zone, use the following command (refer to the below table).
Command Mode Description
time-zone TIMEZONE Sets the time zone.
clear time-zone
Global
Resets the time zone
To display the time zone, use the following command (refer to the below table).
Command Mode Description
show time-zone Enable / Global /Bridge Shows the world time zone map.
Tab. 6.1 shows the world time zone.
Time Zone Country/City Time Zone Country/City Time Zone Country/City
GMT-12 Eniwetok GMT-3 Rio De Janeiro GMT+6 Rangoon
GMT-11 Samoa GMT-2 Maryland GMT+7 Singapore
GMT-10 Hawaii, Honolulu GMT-1 Azores GMT+8 Hong Kong
GMT-9 Alaska GMT+0 London, Lisbon GMT+9 Seoul, Tokyo
GMT-8 LA, Seattle GMT+1 Berlin, Rome GMT+10 Sydney,
GMT-7 Denver GMT+2 Cairo, Athens GMT+11 Okhotsk
GMT-6 Chicago, Dallas GMT+3 Moscow GMT+12 Wellington
GMT-5 New York, Miami GMT+4 Teheran
GMT-4 George Town GMT+5 New Dehli
Tab. 6.1 World Time Zone
To see a configured time zone, use the show clock command.
6.1.4 Network Time Protocol (NTP)
The network time protocol (NTP) provides a mechanism to synchronize time on com-
puters across an internet. The specification for NTP is defined in RFC 1119. To en-
able/disable the NTP function, use the following command.
Command Mode Description
ntp server SERVER1 [SERVER2]
[SERVER3]
Enables NTP function with a specified NTP server.
SERVER: server IP address (maximum 3 servers)
no ntp server SERVER1
[SERVER2] [SERVER3]
Deletes a specified NTP server.
SERVER: server IP address
no ntp
Global
Disables the NTP function.
!