Specifications

CLI Management Guide

TigerAccess™ EE

106 SMC7824M/VSW

Step 4

Exit from FTP server.

ftp> bye

221 Goodbye.

SWITCH#

Step 5

After exiting from FTP, change the name of system image file of CPE stored in this switch

into the single file name.

To change into the single file name, please use the following command.

Command Mode Description

store cpe-nos FILENAME Enable Stores system image file in CPE.

The following is and example to change the name of CPE files into single file name after

exiting from FTP.

ftp> exit

221 Goodbye.

SWITCH# store cpe-nos cpe

SWITCH#

Input the port number connected to CPE which is supposed to install system image.

Step 6

Install the system image file to the CPE.

Command Mode Description

cpe nos-download PORTS Bridge

Installs the system image file to a CPE, which is con-

nected through a port.

Step 7

Reboot the CPE in which new system image file is installed.

5.3.5.4 Configuring AGC (Auto Gain Control)

AGC is the function of lengthen the communication distance. By using this function, it is

possible to communicate in 140m. Therefore, it is better to use this function in the case

the distance from CPE to the user is over 100m. To enable AGC in CPE, use the following

command.

Command Mode Description

cpe agc-on PORTS Bridge Enables AGC in CPE.