Specifications

CLI Management Guide
TigerAccess™ EE
104 SMC7824M/VSW
The following is an example to change the name of CPE file into single file name after ex-
iting from FTP.
Input the port number connected to CPE which is supposed to install system image.

Step 4
Install the system image file to the CPE.
Command Mode Description
cpe nos-download PORTS Bridge
Upgrades the system image file of CPE, which is con-
nected through a port.
Step 5
To set the active OS of the CPE system, use the following command.
Command Mode Description
cpe nos-active PORTS {os1 |
os2}
Bridge Sets the default OS of the system.
To display the version of CPE system image and active OS, use the following command.
Command Mode Description
show cpe-version [PORTS]
Enable
Global
Bridge
Shows the version and active software image of CPE,
which is connected with a port.
PORT: VDSL port number
Step 6
Reboot the CPE in which new system image file is installed.
5.3.5.3 Installing CPE System Image File in Slave
With staking configured in this switch, you can install system image file in Slave after new
system image file of CPE is saved in Master RAM.
To install CPE system image file in Slave. Perform the below steps.
Step 1
Connect to Slave from Master.
SWITCH(bridge)# rcommand 2
Trying 127.1.0.2...
Connected to 127.1.0.2.
Escape character is '^]'.
SWITCH login: root
Password:
SWITCH#
i