Specifications

Management Guide CLI
TigerAccess™ EE
SMC7824M/VSW 101
With enabled stacking, Master’s configuration is same configured in Slave. However,
Master can make application to port of Slave. You should configure it in Slave. Please
save the configuration after applying to port.
To disable the application of profile, use the following command.
Command Mode Description
alarm-config-profile NAME del PORTS Bridge Disables Profile applied to port.
Step 6
save the configuration.
SWITCH(config)# write memory
Building configuration...
[OK]
SWITCH(config)#
To delete Profile, use the following command.
Command Mode Description
no alarm-config-profile NAME Bridge Deletes Profile.
!