Operation Manual

22
Headlight beam adjustment
Headlight can be adjusted vertically.
The vertical beam adjustment is made with the adjusting
screw –1– located at the bottom of the headlight rim.
Turning the adjusting screw in will focus the beam toward
longer distance ( higher beam).
1 Adjusting screw
Stoplight switch adjustment
Turning the stoplight switch adjusting nut –2– in the A
direction will turn on the stoplight early.
1 Stoplight switch
2 Adjusting nut
Light bulb replacement
When exchanging the light bulbs, always replace the bulb
with that of the specified type and rating. This is important
to prevent the electrical lighting circuit from malfunctioning.
The light bulbs are listed below.
Headlight bulb replacement procedure
a. Loosen the two cross screw at the bottom of the
headlight and remove the headlight rim.
b. Remove the socket assembly by pushing down on the
socket and twisting counterclockwise to unhook from
the reflector.
c. Pull the bulb out and replace.
1 Headlight bulb socket
2 Reflector
3 Headlight bulb