User guide

C HAPTER 7 | Administration Settings
System Log
– 63 –
◆ Tx bytes — Displays the total number of bytes transmitted by the
specified interface.
SYSTEM LOG
The Wireless-N Access Point/Repeater supports a logging process that
controls error messages saved to memory or sent to a Syslog server. The
logged messages serve as a valuable tool for isolating Wireless-N Access
Point/Repeater and network problems. The System Log page displays the
latest messages logged in chronological order, from the newest to the
oldest. Log messages saved in the Wireless-N Access Point/Repeater’s
memory are erased when the device is rebooted.
Figure 38: System Log
The following items are displayed on this page:
◆ System Log — Displays the latest log messages in chronological order,
from the newest to the oldest.
◆ Refresh — Sends a request to add the latest entries to the System Log
Table.