User guide

C HAPTER 7 | Administration Settings
System Status
– 61 –
SYSTEM STATUS
The System Information page displays basic system information and the
displayed settings are for status information only and are not configurable
on this page. This information is split into the three sections that follow.
Figure 36: System Status
The following items are displayed on this page:
◆ System Info — Displays the basic system information.
■
Firmware Version — The version number of the current Wireless-
N Access Point/Repeater software.
■
System Time — Length of time the management agent has been
up, specified in hours and minutes.
◆ LAN Configurations — Displays the basic WAN information:
■
Connected Type — Displays the WAN connected mode.
■
MAC Address — The shared physical layer address for the
Wireless-N Access Point/Repeater’s LAN ports.
■
Hostname — The hostname of the STATIC or DHCP client.
■
LAN IP Address — Valid IP addresses consist of four decimal
numbers, 0 to 255, separated by periods. The default setting is
192.168.2.10.
■
Subnet Mask — The mask that identifies the host address bits
used for routing to the WAN port.