User guide

C HAPTER 7 | Administration Settings
System Management
– 58 –
The following items are displayed in the first two sections on this page:
◆ Language Settings — You can change the language displayed in web
interface. Select the language of your choice from the drop-down list,
then click “Apply”. (Options: English, Traditional Chinese, Simple
Chinese, or Korean. Default: English)
◆ Web Interface Settings — To protect access to the management
interface, you need to configure a new administrator’s user name and
password as soon as possible. If a new user name and password are
not configured, then anyone having access to the Wireless-N Access
Point/Repeater may be able to compromise the unit's security by
entering the default values.
■
User Name — The name of the user. The default name for access
to the unit is “admin”. (Length: 3-16 characters, case sensitive)
■
Password — The password for management access. The default
password preset for access to the unit is “smcadmin” (Length: 3-16
characters, case sensitive)
◆ Time Zone Settings — The System Management page allows you to
manually configure time settings or enable the use of a Simple Network
Time Protocol (SNTP) or NTP server.
Figure 33: Time Zone Settings
The following items are displayed in this section on this page:
◆ Current Time — Displays the current system time on the unit.
◆ Sync with host — Updates the unit's time from the web management
PC's system time.
◆ Time Zone — Specifies the time zone in relation to Greenwich Mean
Time (GMT).
◆ SNTP Server — The IP address or URL of the NTP server to be used.
◆ SNTP synchronization — Sets the SNTP sycnronization in hours.