User guide

C HAPTER 6 | Wireless Configuration
Station List
– 56 –
◆ AP PIN — Displays the PIN Code for the Wireless-N Access Point/
Repeater. The default is exclusive for each unit.
◆ Reset WPS to Default — Resets the WPS settings to factory default
values.
WPS Config — Configures WPS settings for the Wireless-N Access Point/
Repeater.
◆ WPS Mode — Selects between methods of broadcasting the WPS
beacon to network clients wanting to join the network:
■
PIN: The Wireless-N Access Point/Repeater, along with other WPS
devices, such as notebook PCs, cameras, or phones, all come with
their own eight-digit PIN code. When one device, the WPS enrollee,
sends a PIN code to the Wireless-N Access Point/Repeater, it
becomes the WPS registrar. After configuring PIN-Code information
you must press “Apply” to send the beacon, after which you have up
to two minutes to activate WPS on devices that need to join the
network.
■
PBC: This has the same effect as pressing the physical WPS button
that is located on the front of the Wireless-N Access Point/Repeater.
After checking this option and clicking “Apply” you have up to two
minutes to activate WPS on devices that need to join the network.
STATION LIST
Displays the station information which associated to this Wireless-N Access
Point/Repeater.
Figure 31: Station List