User guide

C HAPTER 5 | Network Settings
LAN Setting
– 33 –
◆ MAC Address — The shared physical layer address for the Wireless-N
Access Point/Repeater’s LAN ports.
◆ Hostname — The hostname of the STATIC or DHCP client.
◆ IP Address — Valid IP addresses consist of four decimal numbers, 0 to
255, separated by periods. The default setting is 192.168.2.10.
◆ Subnet Mask — Indicate the local subnet mask. (Default:
255.255.255.0.)
◆ LLTD — Link Layer Topology Discovery (LLTD) is a Microsoft proprietary
discovery protocol which can be used for both wired and wireless
networks. (Options: Disable/Enable, Default: Enabled)
◆ UPNP — Allows the device to advertise its UPnP capabilities. (Default:
Disabled)