User guide

– 32 –
5 NETWORK SETTINGS
The Network Settings pages allow you to manage basic system
configuration settings.
LAN SETTING
The Wireless-N Access Point/Repeater must have a valid IP address for
management using a web browser and to support other features. The unit
has a default IP address of 192.168.2.10. You can use this IP address or
assign another address that is compatible with your existing local network.
Click on “Network Settings” followed by “LAN.”
Figure 13: LAN Configuration
The following items are displayed on this page:
◆ IP Setting Type — By default, the access point WAN port is configured
with DHCP enabled. After you have network access to the access point,
you can use the web browser interface to modify the initial IP
configuration, if needed. (Options: STATIC and DHCP; Default: DHCP).