User guide

– 23 –
3 INSTALLING THE ACCESS POINT/
REPEATER
This chapter describes how to install the access point.
SYSTEM REQUIREMENTS
You must meet the following minimum requirements:
◆ An Internet access device (DSL or Cable modem) with an Ethernet port
connection.
◆ An up-to-date web browser: Internet Explorer 6.0 or above or Mozilla
Firefox 2.0 or above.
LOCATION SELECTION
Choose a proper place for the access point/repeater. In general, the best
location is at the center of your wireless coverage area, within line of sight
of all wireless devices. Try to place the access point in a position that can
best cover its service area. For optimum performance, consider these
guidelines:
◆ Mount the access point as high as possible above any obstructions in
the coverage area.
◆ Avoid mounting next to or near building support columns or other
obstructions that may cause reduced signal or null zones in parts of the
coverage area.
◆ Mount away from any signal absorbing or reflecting structures (such as
those containing metal).The access point can be mounted on any
horizontal surface, or a wall.