User Manual
Table Of Contents
- Copyrights
- Compliances
- System Requirements
- Package Contents
- Installation Instructions
- Driver Installation Option 1
- Driver Installation Option 2
- Driver Verification
- Utility Installation
- Utility Configuration
- Wireless Zero Configuration
- Wireless Distance Tables
- Troubleshooting
- Technical Specifications
- Frequently Asked Questions
- Terminology
3 | Getting Started…
Warning:
• Network cards are sensitive to static electricity. To protect the card, avoid touching its
electrical components and always touch the metal chassis of your computer before
handling the card
1. Turn on your computer and insert the EZ Installation Wizard and Documentation
CD. Run the utility software and then reboot when requested.
2. Switch off the computer, unplug the power cord, and remove the computer's
cover. Select an unused PCI bus-master slot and remove its protective bracket.
3. Carefully insert the card and press until all edge connectors are firmly seated
inside the slot. Then, screw the card's bracket securely into the PC's chassis and
put the computer's cover back in place.
4. Boot up the machine.
5. The card will be automatically installed during the Operating System's boot-up
process. Once complete, you may take advantage of the wireless functionality
this adapter has to offer.