User Manual
Table Of Contents
- Copyrights
- Compliances
- System Requirements
- Package Contents
- Installation Instructions
- Driver Installation Option 1
- Driver Installation Option 2
- Driver Verification
- Utility Installation
- Utility Configuration
- Wireless Zero Configuration
- Wireless Distance Tables
- Troubleshooting
- Technical Specifications
- Frequently Asked Questions
- Terminology
Section 6.3 | Windows XP
Step 1: Click [Start] and click [Control Panel]. Then click the [Performance and Maintenance]
icon and select [System].
Step 2: Then go to the Hardware tab and click [Device Manager]. Open the [Network adapters]
section. You should see your SMC2802W 2.4GHz 54 Mbps Wireless PCI Card in this menu. Right-
click the adapter and click [Properties].
Step 3: The Device Status shows that "This device is working properly". If there are any error
messages displayed here, you will need to right-click the SMC adapter and click [Uninstall]. Then
reboot the machine and go through the installation process again.
7 | Utility Installation
Windows 98SE/Me/2000/XP
This Installation method makes the process as simple and Plug-and-Play as possible. Simply run
the EZ Installation Wizard, reboot your machine and insert your EZ Connect g SMC2802W 2.4GHz
54 Mbps Wireless PCI Card. It's as easy as 1-2-3.
Step 1: Insert the EZ Installation Wizard and Documentation CD.
Step 2: Click the [Install Driver/Utility] button.
Step 3: The installation wizard will begin. Click [N
ext >].