User Manual

5 | Driver Installation – Option 2
Windows 95/98/Me/NT/2000/XP
Section 5.1 | Windows 95/98
NOTE: Installation processes will require the use of your original, licensed copy of Windows.
Please have your Windows CD available BEFORE proceeding with the installation.
Step 1: After you have inserted the EZ Card 10/100 SMC1244TX PCI Card in your machine, the
Operating System will automatically recognize the adapter and prompt you for the appropriate
drivers. Click the [Next >] button to begin the installation.
Step 2: Insert the Driver CD and select the [Search for the best driver for your device] option
and click [Next >]. In Windows 95, you may be immediately asked to enter the path of the driver
location. Type ?:\SMC1244\WIN95. (Note: The "?" equals the letter of your CD-ROM drive. In
most cases, this is D.)
Step 3: Clear all checkboxes except for [Specify a location:]. Then press the [Browse] button
and look for the drivers on your CD-ROM. If using Windows 95, browse to ?:\SMC1244\WIN95
and if you are using Windows 98, browse to ?:\SMC1244\WIN98. (Note: The "?" equals the letter
of your CD-ROM drive. In most cases, this is D.)
Step 4: The system should find the drivers. Click the [Next >] button to continue the installation.
The wizard will show "SMC EZ Card 10/100 (SMC1244TX V2)".
(Note: If the system could not find the drivers, click the [< Back] button, and select the [Display
a list of all the drivers...] option. Select [Network Adapters] from the list of devices, press [Have
Disk] and once again browse to the location of the drivers)
Figure 5.1
Step 5: Once the system has copied the SMC drivers from the CD, it may then request files from
your original Windows disk. Please insert the Windows CD at this time.