User Manual

4 | Driver Installation – Option 1 (Recommended)
Windows 95/98/Me/NT/2000/XP
NOTE: Installation processes will require the use of your original, licensed copy of Windows.
Please have your Windows CD available BEFORE proceeding with the installation.
This Installation method makes the process as simple and Plug-and-Play as possible. Simply run
the driver/utility program, reboot your machine and insert your EZ Card 10/100 SMC1244TX PCI
Card. It's as easy as 1-2-3.
Step 1: Insert the Driver, Utility and Documentation CD.
Step 2: Click the [Install Driver] button.
Step 3: Please shut down your machine and insert your SMC1244TX. Once the Windows
Operating System is booted up, it will find the new hardware and automatically install it.
Section 4.1 | Other Setup Processes
The following are Operating System-specific options that may appear during this installation
procedure:
Windows 95/98: If you are using Windows 95 or 98, you must have your original Windows CD
on hand. The system will request it near the end of the installation process.
Windows Me: The installation process is fully Plug-and-Play. You will be asked to reboot when
the process is complete.
Windows NT: This is NOT a Plug-and-Play operating system. As a result, you need to manually
add the adapter to your network properties. (See Section 5 for further details)
Windows 2000/XP: Select [Install the software automatically] if prompted and click [Next] to
complete the installation.