User Manual

Step 5: You will then be prompted to reboot the machine. Press [Yes]. Upon reboot, the
SMC1244TX will be initialized and ready for use.
Section 5.3 | Windows NT
Step 1: NT is not a Plug-and-Play Operating System, thus you need to manually install the
drivers. Right-click on the [Network] icon on the desktop and click [Properties].
Step 2: Go to the [Adapters] tab and click the [Add] button.
Step 3: Click the [Have Disk] button and enter the location of the drivers. This should be
?:\SMC1244\WINNT. (Note: The ? equals the letter of your CD-ROM drive. In most cases, this is
D.) Then click [OK].
Figure 5.6
Step 4: The system will display the model of your adapter. Click [OK] to continue.
Figure 5.7