User Manual

Step 1: After you have inserted the SMC1244TX PCI Card in your machine and turned it back on,
the OS will automatically recognize the adapter and prompt you for the appropriate drivers.
Select the [S
pecify the location of the driver] option. Then click the [Next >] button to begin the
installation.
Step 2: Insert the Driver CD and select the [Specify a location:] option. Clear the [Removable
M
edia] checkbox. Then press the [Browse] button and look for the drivers on your CD. This
should be located in ?:\SMC1244\WINME. (Note: The ? equals the letter of your CD-ROM drive.
In most cases, this is D.) Then click [N
ext >].
Figure 5.4
Step 3: The system should find the drivers. Click the [N
ext >] button to continue the installation.
(Note: If the system could not find the drivers, click the [< B
ack] button, and select the [Display
a list of all the drivers] option. Select [Network Adapters] from the list of devices, press [Have
Disk] and once again browse to the location of the drivers)
Step 4: Once all the necessary files have been copied, the driver installation is complete. Click
[Finish] to exit the wizard.
Figure 5.5