Operation Manual

■Precautions for connecting the USB terminal of the NFC reader / writer
●Use the USB terminal at the back of the product for connecting the PC for the NFC reader / writer. Do not
use the USB terminal on the front of the product.
* It has been reported that the operation becomes unstable when the USB terminal on the side or the front of
the PC is used depending on the type of the PC.
●Use a hub with power adapter when a USB hub is used.
■Upgrade of the firmware
●The firmware of the EXW1-NT1 may need to be upgraded depending on the OS and IC card. Refer to the
SMC website for further details.
■Precaution for static electricity
●When the air is dry such as at wintertime, a large amount of static electricity is generated in the human
body, etc., and it will be applied to the product, which may cause malfunction or operation failure. Before
using the product, discharge static electricity from the human body, IC card, etc.
# Maintenance
●Disconnect the NFC reader / writer from the connection port before maintenance.
●Clean the product with a dry cloth.
●Do not use chemicals such as alcohol or glass cleaner.
This may cause discoloration or change the properties.
■Handling Precautions
●The read/write function may not function properly depending on the operating environment. In
that case, remove and then insert the USB cable.
●Use of scan targets (cards) for the NFC reader/writer is the responsibility of the user.
●It may not function properly on a desk made of metal, such as iron.
●If multiple scan targets (cards) are set, this product does not function properly.
●Do not apply excessive shock to the product, such as dropping or hitting the product or pulling
the cable with force.
●SMC accepts no responsibility whatsoever for any damage or loss resulting from data loss or
corruption during the use of this product.
This device is class B information technology equipment. Although this device is for use in a
home environment, using this device near a radio or television may cause poor reception.
Follow the operation manual to handle the product correctly. VCCI-B
This product is a designated specified induction type read/write communication system based
on the Radio Act. The frequency used is the 13.56 MHz band. Modifying and disassembling
this product and erasing the model number on the back of this product are punishable by
law. To use multiple NFC readers/writers close to one another, leave a one-meter space or
more between them. In addition, make sure that there is no other wireless equipment around
that uses the same frequency band before using this product.