Safety Instructions

Specifications
# Input unit (e-CON type) specifications
Electrical specifications
Items Specifications
Power supply for control and input (US1) 24 VDC +/-10%
Current consumption 100 mA or less
Input
specificatio
n
Control point 1 connector
Shaft type PNP(-COM)
Connector type e-CON (4 pins)
Max. supply current for sensor
0.3 A/ connector
2 A / unit
Input resistance 1.5 kΩ
Rated input current 5 mA
Criteria
OFF voltage/current 5 VDC or less / 2 mA or less
ON voltage/current 15 VDC or more / 5 mA or more
Protection Built-in short circuit prevention
General specifications
Items Specifications
Enclosure rating IP20
Cable tensile force 10 N
Ambient operating temperature
0 to ＋50 ℃
Ambient storage temperature
－10 to ＋60 ℃
Ambient humidity 35 to 85% RH (no condensation)
Withstand voltage
500 VAC-1 minute between external terminals and metallic
parts
Insulation resistance
10 MΩ or more (500 VDC between external terminals and
metallic parts)
Vibration resistance
EN61131-2 compliant
5≦f<8.4 Hz 3.5 mm
8.4≦f<150 Hz 9.8 m/s
2
Impact resistance EN 61131-2 compliant, 147 m/s
2
, 11 ms
Mounting orientation: Through hole for M4 screw (2 pcs.)
Weight 130 g (body only)
Wireless communication specifications
Items Specifications
Protocol SMC original protocol
Radio wave type Frequency Hopping Spread Spectrum (FHSS)
Frequency 2.4 GHz (2403 to 2481 MHz)
Frequency channel 79 ch (Bandwidth: 1.0 MHz)
Communication speed 250 kbps
Communication distance Within 10 m (depending on the operating environment)
Radio Law certificate Construction design certificate (in Japan)