Safety Instructions

(2) Pairing setting
Setting for wireless communication between the base and remote.
The required setting for wireless registration of the remote is Pairing (change of operation mode) only.
After changing the operation mode in the pairing setting, the mode is changed by clicking the Reset
button or re-supplying power so that the mode will be changed to the base registration or listing for
connection.
*: After switching the operation mode with the Pairing setting, check that the W-NS LED on the remote unit flashes in green
and red alternately.
a) Pairing
Select the operation mode of the remote.
The base can be registered only when "Pairing enable" is selected.
Pairing disable: Remote cannot be registered (communication with the registered remote will be
established).
Pairing enable: Remote can be registered.