Safety Instructions

Summary of Product parts
○EX600-WDXE1
No. Description Application
1 Area close to NFC antenna
This area is in close contact with the NFC reader / writer.
"O" is the center of the NFC antenna.
2 Status LED LED display to indicate the unit status.
3
Screw hole for mounting (M4 x
2)
Holds the remote.
4 FG terminal * To be connected to Ground (for better noise immunity).
5 Power supply connector Supplies power to the unit.
6 Connector for input equipment Connect the input equipment
7 Pairing button Pressed when switching to pairing mode.
Grounding should be as close as possible to the product and the grounding distance should be as short as possible.
○EX600-WDYE1
No. Name Application
1 Area close to NFC antenna
This area is in close contact with the NFC reader / writer.
"O" is the center of the NFC antenna.
2 Status LED LED display to indicate the unit status.
3
Screw hole for mounting (M4 x
2)
Holds the remote.
4 FG terminal * To be connected to Ground (for better noise immunity).
5 Power supply connector Supplies power to the unit.
6 Connector for output equipment Connect the output equipment
7 Pairing button Pressed when switching to pairing mode.
Grounding should be as close as possible to the product and the grounding distance should be as short as possible.