Datasheet

(PPA100 shown, Unit: MPa)
Description of Operating Parts
Operation and Functions
Power ON
Power OFF
• When pressed and held
for 3 seconds or more,
the power turns OFF.
• When there is no button
operation for more than
5 minutes, the power
turns OFF. (auto power
OFF function)
Initial Setting
1. When the power is
applied, and “Err” is
displayed on LED,
cut the power off for
a time. After turning
OFF (i.e. the state in
which nothing is
displayed on LCD),
then proceed to 2.
Besides, in the case
that nothing is
displayed on LCD,
proceed to 2 with
doing nothing.
2. Press and hold for 6
seconds or more.
The unit will go into
zero clear. When this
happens “CAL” will
appear on the LCD.
3. When zero clear is
finished, the unit can
be operated.
3. Release the
POWER button.
2. Press and hold the
POWER button for 6
seconds or more.
1. Confirmation of
display
“P” for peak display
“b” for bottom display
In lock mode
Power button
• Power ON/OFF
• Peak mode switching
LCD
• Present pressure display
• Peak/bottom value display
• Units display
LIGHT button
• Turns on back light
MPa
POWER
LIGHT
MPa
POWER
LIGHT
POWER
LIGHT
MPa
POWER
LIGHT
MPa
POWER
LIGHT
MPa
POWER
LIGHT
• The power comes ON
as it is pressed.
• When pressed and held
for 6 seconds or more,
the unit goes into zero
clear.
Press the POWER
button.
Press and hold the
POWER button for 3
seconds or more.
Be certain to perform initial setting when
using for the first time and after changing
batteries, as the unit will indicate memory
data error.
14-12-5
Compact Manometer Series PPA
F.R.L.
AV
AU
AF
AR
IR
VEX
AMR
ITV
IC
VBA
VE
VY1
G
PPA
AL
5