Datasheet

57
Safety Instructions
Series PF2D
Warning
Caution :
Operator error could result in injury or equipment damage.
Warning :
Operator error could result in serious injury or loss of life.
Danger :
In extreme conditions, there is a possible result of serious injury or loss of life.
1. The compatibility of equipment is the responsibility of the person who
designs the system or decides its specifications.
Since the products specified here are used in various operating conditions, their compatibility with the
specific system must be based on specifications, post analysis and/or tests to meet a specific
requirements. The expected performance and safety assurance will be the responsibility of the person
who has determined the compatibility of the system. This person should continuously review the
suitability of all items specified, referring to the latest catalog information and taking into consideration
the possibility of equipment failure when configuring a system.
2. Only trained personnel should operate machinery and equipment.
Assembly, handling or repair of systems should be performed by trained and experienced operators.
3. Do not service machinery/equipment or attempt to remove components until
safety is confirmed.
4. To promote safe operation, be sure to observe company standard and legal
regulations, etc.
Refer to ISO4414, JIS B 8370 (pneumatic system axiom), labor health and safety laws and other
safety regulations.
The following safety instructions are intended to prevent a hazardous situation
and/or equipment damage. These instructions indicate the level of potential
hazard by a label of "Caution", "Warning" or "Danger". To ensure safety,
please observe all safety practices.