Datasheet
36
Related Product
Multi Counter
Series CEU5
CEU5
Power supply voltage
External output
Nil
B
RS-232C
RS-232C + BCD
Nil
D
100 to 240 VAC
24 VDC
Output transistor mode
Nil
P
NPN open collector output
PNP open collector output
MULTI COUNTER
:
CEU5
A
COM
COM COM
B
DC12V
GND F.G.
R.S.
HOLD
BANK1 BANK2
COM
S.STOP
OUT1OUT2OUT3
OUT4
OUT5
AC100~240V
COUNT
PRESET
FUNC.
SD SGRD
RS-232C
UP
LEFT
RIGHT
DOWN
SEL.
SET
MODE
MULTI COUNTER
:
CEU5
A
COM
COM COM
B
DC12V
GND F.G.
R.S.
HOLD
BANK1 BANK2
COM
S.STOP
OUT1OUT2OUT3
OUT4
OUT5
AC100~240V
COUNT
PRESET
FUNC.
SD
SG
RD
RS-232C
UP
LEFT
RIGHT
DOWN
SEL.
SET
MODE
BCD
• OUT1 to OUT 5
• OUT1 to OUT20 (Bank switching)
• Binary output (31 points)
RS-232C
Connection with the Digital Flow Switch (Series PF2)
Connection Method
How to Order
• Possible to measure accumulated pulse output of a Digital Flow Switch by an unit of 100 l (litter) and 10 ft
3
(cube foot) using the
pre-scaling function* of the multi counter (When inputting to the multi counter, Up or Down is selected as input method.)
• Possible to take advantage of all CEU5 functions using preset mode and function mode.
* The set value is calculated by selecting manual mode. By multiplication by 4, then, per pulse value is set.
<Connection with other manufacturers’ encoders>
• Possible to switch multi counter side input method to 2-phase or Up/Down.
• Possible to connect to an encoder if the output method is Open Collector.
• When selecting UP or DOWN, phase A to COM input is counted toward addition direction, phase B to COM input is counted
toward subtraction direction.
When connecting the CEU5 with an encoder from another manufacturer, please thoroughly confirm the specification beforehand.
Please note that the CEU5 may not count normally depending on the output method, output frequency and connecting cable
length, etc. of the encoders.
Regarding connection with scale cylinder, refer to “Stroke reading cylinders & Counters CE series” in the Best Pneumatics Vol. 10.
Caution