Datasheet

Features 1
1
Flow rate setting and monitoring are possible
with the digital display.
2
Two types are available:
Integrated and Remote type.
3
Three types of output:
Switch, accumulated pulse, and analog outputs.
4
Switching from real-time flow rate to
accumulated flow is possible.
5
Two independent flow rate settings are possible.
6 Water resistant construction conforming to IP65
A single controller can monitor the flow rate of 4 different sensors.
4 independent flow rate ranges can be monitored by a single controller.
4-channel Flow Monitor
Series PF2  200
For AirFor Air
Series PF2A
Series PF2A
For WaterFor Water
Series PF2W
Series PF2W
Series PF2D
Series PF2D
For Deionized Water
and Chemicals
For Deionized Water
and Chemicals
165 mm
40 mm
PF2A300/PF2W200 are panel-mounted.
Reduced panel fitting labor

40 mm
76
%
reduced intallation space
(Compared with a PF2A3 and PF2W3, when panel mounted.)
PF2200
1
2
4
3
1
2
4
3

Connection

Function
•
Copy function
Possible to copy information
from one channel to one or
more other channels.
•
Key lock function
•
Unit switching function
•
Peak value and lowest
value holding
•
Channel scan function
Allows constant monitoring of
the displayed pressure value for
each channel.
Sensor connector
Power supply/Output connector
CONNECTOR
No tools required!
CH1
CH2
CH3
CH4
copy
copy
copy
Copying CH1 setting to CH2, 3 and 4.
(Accumulated flow rate is reset when the power supply turns OFF.)