Datasheet

11
Parts Description (Remote Type Monitor Unit)
Sensor connector
Power supply/output connection lead wire
Pin no.
q
w
e
r
Terminal
DC (+)
N.C./IN
DC (−)
INPUT
Connector no.
1
2
3
4
Lead wire colour
∗
Brown
Not used
Blue
White (Temperature sensor 1 to 5 V input)
1234
1
2
3
4
5
Pin no.
Grey COPY
White OUT2
Black OUT1
Blue DC(−)
Brown DC(+)
2000
r
q
e
w
Cable Specifications
Conductor
Sheath
Finished external diameter
Insulator
AWG26
Approx. 0.5 mm
Cross-linked vinyl
Approx. 1.0 mm
Brown, Blue, Black, White, Grey
Oil and heat resistant vinyl
ø3.5
Nominal cross section area
External diameter
Material
External diameter
Colours
Material
∗ When using the lead wire with M12 connector included with the LFE쏔J series.
Do not connect black.
Sensor connector
Power supply/output connection lead wire
Main screen (2-colour display)
Output display
(Status LED’s)
Sub screen
UP button SET button DOWN button
Unit display
Description Function
Main screen (2-colour display)
Sub screen
Output display (Status LED’s)
Unit display
UP button
SET button
DOWN button
Displays the flow value, setting mode and error codes.
Displays the output condition of OUT1 and OUT2. When ON: Orange light turns on.
Indicates the unit currently selected.
Selects the mode and the display shown on the sub screen, or increases the ON/OFF set value.
Press this button to change the mode and to set a value.
Selects the mode and the display shown on the sub screen, or decreases the ON/OFF set value.
Displays the accumulated flow, set value, peak/bottom value, fluid temperature and line
names. In the setting mode, the set status is displayed. (For details, refer to page 13.)
Series LFE0