Datasheet

Maintenance display LED light ON
When attached
to the main unit
300, 380, 620, 780, 1100, 1260, 1500, 1900, 2300
460, 540, 700, 860, 940, 1020, 1180, 1340, 1420,
1580, 1660, 1740, 1820, 1980, 2060, 2140, 2220
Standard
-X10
Related Equipment
Electrostatic Sensor / Series IZD10
Enables the “visualisation” of static electricity.
 Analogue output: 1 to 5 V
 Measurement voltage range: ± 0.4 kV ( Installation distance 25 mm )
± 20 kV ( Installation distance 50 mm )
 Dimensions:
17 mm x 13 mm x 88 mm
 Measurement range
Sensor head
Installation distance
Detection range
Detection
hole
40
mm
 Dirt-detection on an electrode
needle
Detects electrode needle dirt upon signal input
and provides maintenance output signals,
reducing maintenance man-hours.
 Electrode cartridge drop prevention
•
Locking by double-action
•
Security cover
Can additionally prevent
electrode cartridges from
dropping off.
 3 types electrode needle material
•
Tungsten (Ion balance: ±30 V)
•
Monocrystal silicon
(Ion balance: ±30 V Applicable to environments
sensitive to metal contamination)
•
Stainless steel (Ion balance: ±100 V)
 Made to Order
•
Non-standard bar length:
IZS31--X10
•
Electrode cartridge 40 mm-pitch: -X15
(Supported length: 1260 mm max.)
Note) Air purge nozzles are arranged at an 80 mm-pitch.
Electrostatic Sensor Monitor /
Series IZE11
Receives an output from the IZD10 electrostatic
sensor to digitally display the electrostatic
potential.
 Output: Switch output x 2 + Analogue output
(
1 to 5 V, 4 to 20 mA)
 Minimum unit setting:
0.001 kV (at ±0.4 kV)
0.1 kV (at ±20 kV)
 Display accuracy: ±
0.5% F.S. ±1 digit or less
 Detection distance correction function
(adjustable in
1 mm increments)

Supports two types of sensors
(±0.4 kV and ±20 kV) through range selection
Installation distance
10 to 50 mm
IZD10-110 (±0.4 kV)
25 to 75 mm
IZD10-510 (±20 kV)
New
Features 4